Is there a Doctor in the House??????
Or.....a Scientist!
Or.....a Post Graduate!
- Does your current research project entail precision movement of samples or instruments with repeatable integrity of around 5 Microns?
- Do you find it frustrating when the positioning kit you purchased takes a further week to assemble, connect and program?
- Would you like to order a pre-built assembly with PC compatible motion software which is assembled, tested and ready to run?
If this has captured your interest then take a look at the packages below. These special offers will let you get on with the " Serious Work " in the minimum time possible:- Research Motion Pack Type A...Stepper Driven.
- X-Y Precision Table Assembly with 5mm Ballscrews 300mm Stroke including Home Datum and Travel Limits. Accuracy 30 microns , Repeatability 5 microns.
- Driven by Two 23 Frame 2-Stack Stepper Motors with Terminal Box for EMC Compliance.
- Two DIN-RAIL mounting Intelligent Positioning Drives with Software Pack 5Amps/75V and Direct off line supply (95Vac to 265Vac). Mini Stepping Resolution 4000 per rev. Giving move resolution of 1.25 Microns.
- Supplied with 1.5 Metre Cables on Motors and Limits and Fused Mains Lead with plug.
Price...£ 4,850.00 excludes VAT and delivery
Research Motion Pack Type B...Servo Driven.
- X-Y Precision Table Assembly as in Pack A.
- Driven by Two 23 Frame MB56-04 Brushless Servo Motors with integral Encoders.
- Two Programmable 1KVA Compax 1000SL Brushless Servo Drives powered from 240V ac.
- Supplied with 1.5 Metre Cable-set for Motors and Limits and Fused Mains Lead with plug.
Price...£ 5,350.00 excludes VAT and delivery
Positioning Pack Options....
Option 1. Simultaneous 2-Axis Control for interpolated moves.
Compumotor 6K2 2-Axis stepper or servo controller with PC networking capability to work in Visual Basic or with National Instruments Labview type software.
Option 2. Backplate- Build and Pre-Wire
Control Components Assembled , Wired and tested on a Backplate with mains connector and switch. To suit Laboratory environments where a total enclosure is not required.
Option 3. Third Axis of control.
Rotary or Vertical Axis to your specification.
Option 4. Encoder Feedback for higher precision.
Inclusion of Linear Strip Encoders and high- resolution drives to increase the resolution to below one micron.
For more information about these Positioning Packages please contact Trevor De Wilde on 01376 333309 or tdewilde@micromech.co.uk |
