 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
28th July 2008 |
Eye Spyraflo, a look at bearing applications..... Episode 19: Crushing news about rubbish is an environmentally friendly story |
 |
A world leader in the development of technically advanced automated systems for recovering and recycling beverage containers uses technology, known as 'Reverse Vending' invented by the company founder. Now sold worldwide the containers are accepted back directly from the consumer, accounting for each one processed and refunding the deposit to the consumer more.. |
14th July 2008 |
Danaher Chronicles of motion control.......P7000 stepper drive provided higher quality at lower cost |
 |
A manufacturer using neck-banding machines to wrap a plastic protective wrap around the cap of bottles preventing tampering used relatively low-cost machines that had to meet stringent speed requirements. The challenge was to upgrade the quality while still reducing costs more.. |
23rd June 2008 |
News Flash! |
 |
Alpha Gearheads have announced a major re-branding to bring all their products together under one banner. Their press announcement below explains all more.. |
17th June 2008 |
Isel Automation Catalogue - 2008 Version now available in English |
 |
Isel automation have now released the English version of their 2008 catalogue more.. |
16th June 2008 |
Delta Tau tales of motion control.....Episode 14: PMAC powers ahead setting new standards |
 |
The Delta Tau PowerPMAC motion controller sets new standards for accuracy, speed and overall performance putting them years ahead of the competition. Indeed, it could be said that the PowerPMAC has unparalleled computing power to maximise productivity while anticipating trouble more... |
9th June 2008 |
Meet the Team - Daniel Parrish |
 |
In the 26th of our Meet the Team series, we introduce our Warehouse Supervisor Daniel Parrish more... |
2nd June 2008 |
Keep on track with Isel......Episode 6: Router allows prototype maker to increase sales by 30 percent |
 |
The improved accuracy and faster turnaround made possible by a computer numeric controlled (CNC) router has helped generate a 30 percent increase in sales at a manufacturer of plastic prototypes by increasing the repeat business more... |
22nd May 2008 |
New Catalogue Available |
 |
Announcing the release of the new Parker Bayside Precision Products catalogue more... |
19th May 2008 |
A new anti-cage creep solution boosts bearing life |
 |
A new revolutionary anti-cage creep solution, the KRE-ACC has been developed for manufacturers of the next generation of machines. Now available from Micromech, the UK distributor for PM bearings, this innovative design is introduced to meet today’s tough demands for improved bearings more... |
12th May 2008 |
Precision linear actuators replace pneumatics and hydraulics |
 |
The Precision Linear Actuators (PLA) ranges are actuators designed for automation tasks in the industry or for the replacement of pneumatics or hydraulics wherever they may exist. These strong, fast and accurate actuators are a result of over 40 years of actuator development representing the state of the art in linear actuator design more... |
5th May 2008 |
Keep on Track with Isel..... Episode 5: Fabricator is delighted by their 'sinking' profits |
 |
A solid surface fabricator realised that by using CNC technology to improve sink mounts the company could install more sinks in less time using fewer router bits more... |
28th April 2008 |
Meet the Team - Joe Marshall |
 |
In the 25th of our Meet the Team series, we introduce our Quality Manager Joe Marshall more... |
21st April 2008 |
Piggy-back, bipolar, chopping, microstep drive |
 |
The NPAD10BF from Micromech is an easy to mount and simple to connect microstep drive that fits onto the back of NEMA Size 17 (42mm square) motors. This neat solution has all the advantages of a piggyback drive without the possible problems of ‘built in’ drives more... |
14th April 2008 |
The powerful Compax3 servo drive family is extended with 4 new multi-axis modules |
 |
The new C3M servo drive family from Micromech offer considerable advantages for multi-axis applications in the 2 to 20kW power range more... |
7th April 2008 |
Compact, single axis, ballscrew positioning table outperforms its rivals |
 |
New from Micromech is the URS, a single axis positioning table, which integrates a linear bearing and precision ballscrew making it compact yet outperforms conventional positioning tables more... |
31st March 2008 |
Keep on track with Isel....Episode 4: Foam fabricators cut production time from five days down to two |
 |
A CNC machine allows foam fabricators to produce a typical order of 20 sample models in two days compared to the five days needed to cut the foam pieces by hand. In addition to saving time the CNC machine frees up engineers who previously had to pitch in and help cut foam pieces when a large quantity of samples were needed more... |
24th March 2008 |
Eye Spyraflo, a look at bearing applications......Episode 18: Thirty years and still delivering cash for banks world-wide |
 |
In 1977 NCR were developing the first of what was to become a long and highly successful line of ATM machines; they were the forerunners of the machines now seen in every bank and on every street corner more... |
17th March 2008 |
Meet the Team - Ian Brown |
 |
In the 24th of our Meet the Team series, we introduce our Sales Manager Ian Brown more... |
1 2
|
|
Copyright © 2008 Micromech Ltd. All rights reserved.
|