Quotation Request		01376 333333
Need to reduce your paperwork, cut your vendor base, lower costs/simplify production? What's really required are products delivered from your supplier, ready to install when you need them!

Delta Tau Motion Control Cards - PDF Catalogues

Systems

Compact UMAC Turbo CPU Board
Part Number: 3A0-603625-10x

Delta Tau’s UMAC-CPCI systems provide a compact and clean integration of motion and I/O control for sophisticated automation equipment. The system consists of a modular set of 3U-size (100mm x 160mm) boards in the Compact PCI format, implementing Turbo PMAC software and hardware functions, communicating with each other over a common backplane (the Compact UBUS). All field wiring is available on rear connectors, suitable for a user-designed distribution system to the machine. UMAC (Universal Motion and Automation Controller) -CPCI systems provide integrated connectivity as well as ease of assembly, diagnostics, and repair. UMAC-CPCI systems differ from standard UMAC systems in that all field wiring comes to the back of the rack, behind the backplane, instead of direct top and bottom access.

• Provides a compact and clean integration of motion and I/O control for sophisticated automation equipment.
• Provides integrated connectivity as well as ease of assembly, diagnostics, and repair.
• Implements a Turbo PMAC2 CPU in the 3U CPCI form factor

Software Features

• Trajectory Generation Features
  - Linear interpolation mode with S-curve accel/decel
  - Circular interpolation mode with S-curve accel/decel
  - Rapid point-to-point move mode
  - Cubic B-spline interpolation mode
  - Cubic Hermite-spline (PVT) interpolation mode
  - Automatic move-until-trigger functions with hardware capture
  - Altered destination on the fly
  - Interactive jog moves
  - Multi-move lookahead for velocity and acceleration limiting
  
• Servo Features
  - Standard digital PID feedback filter
  - Velocity, acceleration, and friction feedforward
  - 2nd-order notch/low-pass filter
  - Gains changeable at any time
  - Programmable input, integrator, and output limits
  - Alternate 35-term “pole-placement” servo filter
  - Alternate user-written high-level “Open Servo” algorithms
  
• Commutation Features
  - Sinusoidal commutation of AC servo motors
  - Vector control of AC induction motors
  - Digital current-loop closure with direct PWM output (PMAC2)
  
• Compensation Features
  - Position compensation tables (1D & 2D)
  - Torque compensation tables
  - Backlash compensation
  - Tool radius compensation
  
• Safety Features
  - Hardware and software overtravel limits
  - Amplifier enable/fault handshaking
  - Following error limits
  - Integrated current limit
  - Encoder loss detection (some versions)
  - Watchdog timer
  - Program and communications checksums
  
• Computational Features
  - Real-time multi-tasking operating system
  - 48-bit floating-point math for user programs
  - Trigonometric and transcendental functions
  - Automatic type-matching of different variable types
  - User-defined pointer variables to any registers
  
• Feedback sensor types that can be processed
  - Digital quadrature encoders
  - Sinusoidal encoders, interferometers
  - Resolvers
  - Potentiometers
  - LVDTs, RVDTs
  - Parallel-format encoders, interferometers
  - MLDTs
  - Serial absolute encoders (e.g. SSI)
  
• Coordination and Master/Slave Features
  - User-defined coordinate systems for automatic coordination of axes
  - Separate coordinate systems for independent motion of axes
  - Multi-motor axis support (e.g. gantries)
  - Dynamic axis transformations (e.g. offsets, rotations, mirroring)
  - User-written forward and inverse-kinematic algorithms for non-Cartesian geometries
  - Electronic gearing (no programming required)
  - Electronic cams with programmable profiles
  
• Motion Program Features
  - High-level programming language
  - Automatic sequenced execution of moves
  - Calculations and I/O synchronous to motion
  - Axes programmed in user engineering units
  - Motion values as constants or expressions
  - Automatic coordination of multiple axes
  - Ability to execute G-code programs
  
• PLC Program Features
  - Execution asynchronous to programmed motion
  - I/O control as in hardware PLC
  - Executive functions for standalone applications
  - Safety and status monitoring
  - Servo gain scheduling
  - Data reporting functions
  - Access to all registers in controller

5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849

Copyright © 2012 Micromech Ltd. All rights reserved.