Quotation Request		01376 333333
Need to reduce your paperwork, cut your vendor base, lower costs/simplify production? What's really required are products delivered from your supplier, ready to install when you need them!

Delta Tau Motion Control Cards - PDF Catalogues

Systems

ACC-24E2
Digital Direct PWM Axis Interface Board
Part Number: 3R0-603397-10x

The Acc-24E2 axis interface and breakout board provides the interface circuitry and breakout connectors for either two or four channels of digital servo interface. This accessory is used to control digital amplifiers with direct PWM digital signals. Alternatively, any individual channel of this accessory can be set up to provide a pulse and direction signal (PFM) in case both a digital PWM and a stepper motor are controlled with it. A Mini-D 36-pin amplifier connector is provided for each axis. There is removable encoder terminal block and a removable flag terminal block for each axis. The ACC-24E2 can have either Option 1A for two additional analog servo interface channels or Option 1D for two additional digital servo interface channels. This means that this accessory can be populated with a half digital interface and a half analog interface. This accessory connects to the CPU board through the backplane expansion port. It is intended for UMAC usage only.

Axis Interface Options
Acc-24E2 - 3U Digital Axis Interface/Breakout Board
Acc-24E2 Opt-1A - Additional 2 axes analog servo interface/breakout

5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849

Copyright © 2012 Micromech Ltd. All rights reserved.