CNC Technology - PDF Catalogues
Flatbed and Gantry Units
FB2 / PA1 / PA 2
General note
Flatbed units as defined in the machine guideline are incomplete machines according to the modular system with processing paths of 250 to 1250 mm. Step motors (MS200HT), set for no-play, are used as spindle drives Recirculating ball drives with a repeatability of ± 0.02 mm (positioning reproducibility) are used.
The linear guides used are the isel double track feeds, proven over many years, with no-play pre-stressed linear ball bearings and recirculating ball spindles with a repeatability of ± 0.02 mm. All units are equipped with two limit switches per spindle.
The machining and positioning units are available in a number of versions and are characterised by smooth running and high process speeds. The use of high quality aluminium components with flat-milled surfaces achieves low weight and high accuracy. isel X/Y/Z units are the ideal basis for setting up machines and systems for fitting and assembling, pressing and engraving, drilling and milling, milling and screwing, shaping and modelling, bonding and casting, soldering and welding, measuring and 
checking, sawing and cutting, etc.
Options:
- matched controller (e.g.: iMC-S8)
- Software modules for operation in CAM, CNC, and PLC applications
- Subframe
- Enclosure
- Spindle motors
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.