|

Isel Linear Units with Ball Screw feed Axis - PDF Catalogues
Compound table 1 
Compound tables
- travel ranges:
x-axis: 420 mm
y-axis: 420 mm
- two linear guides LES 5,
225 x 75 mm, with integrated
stepping motor MS 160 and/or
servo motor MV 120 and
ball screw drive, pitch 5 mm
- connecting plates for compound tables, made of ground steel
- individual assembly of a
compound table by combining
different linear guides LES 5
The compound table 1 from isel consists of two linear guides LES 5 that are connected in rectangular way by two ground steel plates. In this basic version, the linear guides have a travel range of 420 mm. The individual axes are driven by a stepping motor and a ball screw drive with a pitch of 5 mm.
In order to reach very high load capacities, each axis is provided with four linear slides.
In addition to this basic version, it is possible to combine all linear guides LES 5 by means of connecting plates for compound tables from isel. You can choose from different travel ranges, pitches and drive motors to assemble an individual compound table.
The face-milled aluminium T-slot plates form isel are available in the widths 250 mm und 375 mm and in the lengths 592 mm, 692 mm, 792 mm and 1,092 mm. The scope of delivery includes the complete fastening material necessary.
Options:
other travel ranges
pitch: 2.5, 4, 10 and 20 mm
T-slot plate 250 mm
T-slot plate 375 mm
|
| |
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.
|