Linear Units with Ball Screw feed Axis                                     

Compound table 2
Compound tables

• travel ranges:
  x-axis: 450 mm
  y-axis: 220 mm
• linear guides with ball screw feed axes, pitch 5 mm
• connecting plates for compound tables made of ground steel
• individual assembly of a compound table by combining different linear guides
  The compound table 2 from isel consists of two linear guides that are connected in rectangular way by two ground steel plates.

The x-axis consists of a linear unit LES 5 with a motor drive that is integrated in an aluminium profile. It has a travel range of 450 mm. The y-axis consists of linear guide LES 4, and has a travel range of 220 mm. Both axes have a ball screw drive with a pitch of 10 mm. The compound table 2 can be equipped both with a stepping motor (160 Ncm) and a servo motor (120 W).
Both linear guides have two linear slides.

In addition to this basic version, it is possible to combine all linear guides by means of connecting plates for compound tables from isel.
You can choose from different travel ranges, pitches and drive motors to assemble an individual compound table.

Options:
other travel ranges
- pitches: 2.5, 4, 10 and 20 mm

Copyright © 2009 Micromech Ltd. All rights reserved.