Linear Units - Linear Guides                                            

LFS-8-1 (MLF 1)

• Stress-resistant
• Aluminium shaft profile, anodized
• Bottom-up mounting by means of thread rails M6 in the T-groove indentation
• Conditionally ...

LFS-8-2 (MLF 2)

• Stress-resistant
• Aluminium shaft profile, anodized
• Bottom-up mounting by means of thread rails M6 in the T-groove indentation
• Conditionally ...

LFS-8-3 (MLF 3)

• Stress-resistant
• Aluminium shaft profile, anodized
• Top-down mounting by means of through holes for M6 in a 100 ...

LFS-8-4 (MLF 4)

• Stress-resistant
• Aluminium shaft seat profile, anodized
• Bottom-up mounting by means of thread rails M6 in the T-grooves ...

LFS-8-5 (MLF 5)

• Twist-resistant
• Aluminium shaft profile, anodized
• Top-down mounting by means of through holes for M6 ...

LFS-8-6 (MLF 6)

• Twist-resistant
• Aluminium shaft profile, anodized
• Attachment from below by means of thread rails in ...

LFS-8-7 (MLF 7)

• Twist-resistant
• Aluminium shaft profile, anodized
• Top-down mounting by means of through holes for M6 ...

LFS-8-8 (MLF 8)

• Especial Twist-resistant
• Aluminium shaft profile, anodized
• Attachment from below by means of thread rails ...

LFS-8-9 (MLF 9)

• especial Twist-resistant
• Aluminium shaft profile, anodized
• Bottom-up mounting by means of thread rails in ...

LFS-12-21

• Mounting
  – bottom thread M4 Raster 50 mm
  – from the top special screw ...
  

LFS-12-22

• Mounting
  – bottom thread M4 Raster 50 mm
  – from the top special screw ...

LFS-12-10 (DSF 1)

• aluminium shaft profile (anodized)
• with Roller Carriage or Slide Block
• Bottom-up mounting by means of thread rails ...

LFS-12-11 (ELF 1)

• Aluminium shaft profile, anodized
• Bottom-up mounting on a plane surface by means of thread rails M6 ...

LFS-12-1 (LF 1)

• Stress-resistant
• Aluminium shaft blocks
• Bottom-up or top-down mounting by means of through holes for M6 in the ...

LFS-12-2 (LF 2)

• Stress-resistant
• Aluminium shaft profile, anodized
• High parallelism due to patented shaft seat contour
• High guiding precision
• Bottom-up or top-down ...

LFS-12-3 (LF 3)

• Stress-resistant
• Aluminium shaft profile, anodized
• Increased shaft distance allows for taking up higher forces
• Bottom-up or top-down mounting ...

LFS-12-7 (LF 7)

• Stress-resistant
• Aluminium shaft profile, anodized
• Attachment from below by thread rails in the T-groove extrusion ...

LFS-16-1 (ILF 1)

• Aluminium shaft profile, anodized
• Top-down mounting in a 100 mm raster on a plane surface by ...

LFS-16-2 (ILF 2)

• Aluminium shaft profile, anodized
• Bottom-up mounting on a plane surface by means of thread bars M6 ...

Belt-Drive Slide
Voyager Series 1

• Stock lengths up to 3 meters
• Custom lengths up to 6 meters
• All steel profile rail for high load capacity
• 50 mm wide steel reinforced belt for heavy loads
• Several motor options available
• Stainless steel available
• T-slots on three sides for mounting and accessories

Copyright © 2008 Micromech Ltd. All rights reserved.