Motors - PDF Catalogues
Nippon - PF35T Series Stepper motors
| Parameters | Units |
PF35T-48 |
|||
| Drive Mode | Unipolar |
Bipolar |
|||
| Excitation Mode | Full-step (2-2 ex) |
||||
| Step Angle | ° |
7.5 |
|||
| Step Angle Tolerance | % |
± 5 |
|||
| Steps per Revolution | 48 |
||||
| Voltage | V |
12 |
5 |
12 |
5 |
| Winding Resistance | ohm/F |
70 |
12 |
72 |
16 |
| Winding Inductance | mH/F |
36 |
6.5 |
60 |
6.2 |
| Holding Torque | mNm |
18 |
18 |
27 |
27 |
| Rotor Inertia | kgm² |
2.7 x10 -7 |
|||
| Starting Pulse Rate, Max | pps |
600 |
|||
| Slewing Pulse Rate, Max | pps |
610 |
|||
| Ambient Temp. Range, Operating | ? |
-10 ~ + 50 |
|||
| Temperature rise | K |
70 |
|||
| Mass | g |
77 |
|||
Note: Above data is based on Rated Voltage Drive. The magnet type is Anisotropic
Outline Dimension Drawing
Dimensions in MM. Inches = MM*0.04
PF35T-48C1 Unipolar Rated/Double Voltage Drive
PF35T-48D1 Unipolar Chopper Drive at 24V
PF35T-48R1 Bipolar Rated/Double Voltage Drive
PF35T-48Q1 Bipolar Chopper Drive at 24V
Torque Curve Note: 1 mNm = 0.14 oz-in.
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.