Pro-Dex Multi-Axis Motion Controllers - PDF Catalogues
VME & VME64 - PCI Bus - ISA Bus - Serial - PC/104 - USB - Ethernet
VME & VME64 Motion Controllers
 |
|
| MAXv Multi-Axis Motion Controller |
|
| Item No. | MAXv |
The MAXv is a VME/VME64 8-axis motion for stepper and/or motor control. |
|
 |
|
| VS4 Family of Multi-Axis Motion Controllers |
|
| Item No. | VS4 |
The VS4 is a VME bus 4-axis motion controllers with a step and direction output and encoder feedback on all axes. |
|
 |
|
| VX2 Family of Multi-Axis Motion Controller |
|
| Item No. | VX2 |
The VX2 is a VME bus motion controllers with a step and direction output. |
|
 |
|
| MAXp Multi-Axis Motion Controller |
|
| Item No. | MAXp |
The MAXp is a PCI bus-based motion controller with up to 8 axes of user-definable servo & stepper motion control. |
|
 |
|
| PCIx Multi-Axis Motion Controller |
|
| Item No. | PCIx |
The PCIx is a PCI bus-based motion controller with 2 or 4 axes of motion that support both servo and stepper applications. |
|
 |
|
| PC46 Multi-Axis Motion Controller |
|
| Item No. | PC46 |
The PC46 is an ISA bus-based motion controller. It is a 16-bit ISA card that controls 2 to 6 stepper axes depending on model. |
|
 |
|
| PC48 Multi-Axis Motion Controller |
|
| Item No. | PC48 |
The PC48 is an ISA bus-based motion controller. This unit can control up to 8 stepper axes depending on model. |
|
Motion Controllers: Serial
 |
|
| MAXnet Motion Controller |
|
| Item No. | MAXnet |
The MAXnet is a 5-axis motion controller for stepper and/or servo motor control on a single 4 x 6.5 inch card. |
|
 |
|
| PC78 Multi-Axis Motion Controller |
|
| Item No. | PC78 |
The PC78 is both a PC/104 motion controller that conforms to the PC/104 ISA bus standard as well as a stand-alone controller via a RS-232 communication port. |
|
Motion Controllers: PC/104
|
|
| PC78 Multi-Axis Motion Controller |
|
| Item No. | PC78 |
The PC78 is both a PC/104 motion controller that conforms to the PC/104 ISA bus standard as well as a stand-alone controller via a RS-232 communication port. |
|
Motion Controllers: USB
USB controllers
 |
|
| UMX Motion Controller for USB |
|
| Item No. | Coming Soon |
Coming Soon |
|
|
|
| MAXnet Motion Controller |
|
| Item No. | MAXnet |
The MAXnet is a 5-axis motion controller for stepper and/or servo motor control on a single 4 x 6.5 inch card. |
|
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.