 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Multi-Axis Motion Controllers 
PC48 - ISA
The PC48 is an ISA bus-based motion controller. This unit can control up to 8 stepper axes depending on model.
Features
- Each axis has a pair of limits and one home input per axis plus an auxiliary output for driver current control
- Up to 22 "user definable" TTL I/O lines
- Compatible with the IO38 breakout board
- Independent and coordinated motion of all axes
- Software for Windows® 95 and Windows® NT
- Constant velocity linear interpolation (all axes)
- Custom, Parabolic, S-curve & Linear trajectory profiles
- Encoder feedback is available
- Electronic gearing
- Circular interpolation
Accessories:
CON38 - Connector Kit (80-pin)
CBL38-12 - 12 ft cable w/mating connector, 80-pin
IO38 - I/O Module - 80-pin for PC48 without cable
IO38-12 - I/O Module - 80-pin for PC48 with 12 ft cable
| Model | Computer Interface | Stepper Axes | User I/O | Non-Current Products |
| PC48-2 | ISA (PC/XT/AT) bus |
2 Open Loop | 16 | PC38-2 & PC39-2 |
| PC48-4 | 4 Open Loop | 18 | PC38-4 & PC39-4 | |
| PC48-6 | 6 Open Loop | 20 | PC38-6 & PC39-6 | |
| PC48-8 | 8 Open Loop | 22 | PC38-8 & PC39-8 | |
| PC48-2E | 2 Closed Loop (Encoder) | 16 | PC38-2E & PC39-2E | |
| PC48-4E | 4 Closed Loop (Encoder) | 18 | PC38-4E & PC39-4E | |
| PC48-6E | 2 Closed Loop (Encoder) 4 Open Loop |
20 | PC38-6E & PC39-6E |
Copyright © 2009 Micromech Ltd. All rights reserved.
|