 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Multi-Axis Motion Controllers 
PC58 - ISA
The PC58 is an ISA bus-based motion controller. The PC58 is capable of controlling up to 8 axes of stepper and/or servo motion.
Features
- Encoder feedback for stepper axes is available
- Servo outputs can be +/- 10VDC, 0-10VDC with direction, bipolar PWM, or unipolar PWM with direction (configurable by the user)
- Can control a mix of servo and stepper axes
- Each axis has a pair of limit inputs plus a home input as well as an auxiliary output for drive or amplifier current control
- Up to 22 "user definable" TTL I/O lines
- Independent and coordinated motion of all axes
- Constant velocity linear interpolation (all axes)
- Custom, Parabolic, S-curve & Linear trajectory profiles
- Dual-Port RAM for real-time communications
- Software for Windows® 95 and Windows® NT
- Compatible with the IO58 breakout board
- Electronic gearing
- Circular interpolation
Accessories:
CON58 - Connector Kit (100-pin)
CBL58-3M - 3 Meter cable w/mating connector, 100-pin
IO58 - I/O Module - 100-pin without cable
IO58-3M - I/O Module - 100-pin with 3 meter cable
| Model | Computer Interface | Servo Axes | Stepper Axes | User I/O |
| PC58-8 | ISA (PC/XT/AT) bus |
0 | 8 Open Loop | 22 |
| PC58-4 | 0 | 4 Open Loop | 18 | |
| PC58-4E | 0 | 4 Closed Loop (Encoder) | 18 | |
| PC58-4S | 4 | 0 | 18 | |
| PC58-8S | 8 | 0 | 22 | |
| PC58-2S2 | 2 | 2 Open Loop | 18 | |
| PC58-2S6 | 2 | 6 Open Loop | 22 | |
| PC58-4S4 | 4 | 4 Open Loop | 22 | |
| PC58-6S2 | 6 | 2 Open Loop | 22 |
Copyright © 2009 Micromech Ltd. All rights reserved.
|