|
Pro-Dex Multi-Axis Motion Controllers - PDF Catalogues
MAXnet Motion Controller
|
| Item No: |
MAXnet
|
| Description: |
The MAXnet is a 5-axis motion controller for stepper and/or servo motor control on a single 100 x 165mm card. The communications interface is Ethernet and/or RS232. Each axis can be selected by the user to be an open or closed stepper, or a servo axis. Outputs are provided for 16 bit analogue servo output as well as step and direction for stepper system applications. The servo loop is a PID filter with feed-forward coefficients and an update rate of 122 ms on all 5 axes. An additional 8 User Definable I/O is available for synchronisation and control of other events. Incremental encoder feedback, differential or single ended, is used for all servo axes and is available for position feedback and may also be used for slip or stall detection.
|
| Models: |
| MAXnet-1000 |
Ethernet / RS232 1-Axis Motion Controller and I/O |
| MAXnet-2000 |
Ethernet / RS232 2-Axis Motion Controller and I/O |
| MAXnet-3000 |
Ethernet / RS232 3-Axis Motion Controller and I/O |
| MAXnet-4000 |
Ethernet / RS232 4-Axis Motion Controller and I/O |
| MAXnet-5000 |
Ethernet / RS232 5-Axis Motion Controller and I/O |
|
| Features: |
Ethernet or RS232 Communications
- Ethernet utilises standard TCP/IP protocol.
- RS232 Baud rate = 9600 to 115.2K
- Servo PID update rate of 122 ms on all 5 axes
- Configurable PID filter with feed forward coefficients.
- Each axis has +Limit, -Limit, Home, Auxiliary out, and axis control out.
- 8 General purpose bi-directional TTL I/O
- 1 General purpose analogue output with 16 bit, +/-10 VDC input
- 2 Channels of general purpose analogue input with 16-bit (+/-10 VDC)
- Each axis has an incremental encoder input
- Quadrature Encoder Feed back up to 16 MHz on all encoder inputs.
- Step pulses from 0 to 4,194,303 steps per second
- Accuracy for point to point moves ±0 counts.
- Backlash compensation.
- Custom, parabolic, “S”-Curve & linear trajectory profiles.
- Real time encoder position capture
- S-Curve with 4-quadrant jerk parameters.
- Small form-factor, 100 x 165mm
- Over 250 ASCII character commands, “universal” to current and previous Pro-Dex controllers
- Designed for expandability (custom solutions)
ACCESSORIES
IOMAXnet I/O Breakout Board for MAXnet
CBL58-3M I/O cable for MAXnet to IOvMAX, 3 metres
|
|
| |
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.
|
