Multi-Axis Motion Controllers - PDF Catalogues
VME58- VME
The VME58 is a VME bus-based motion controller with 4 or 8 axes of motion that support both servo and stepper applications.
- Servo outputs can be +/- 10VDC, 0-10VDC with direction, bipolar PWM, or unipolar PWM with direction (configuration by the user)
- Encoder feedback for stepper axes is available
- Each axis has a pair of limit inputs plus a home input as well as an auxiliary output for drive or amplifier current control
- Independent and coordinated motion of all axes
- Up to 14"user definable" TTL I/O lines
- Custom, Parabolic, S-curve & Linear trajectory profiles
- Constant velocity linear interpolation (all axes)
- Electronic gearing
- Circular interpolation
- 100 pin Front Panel connection for all signals
Accessories:
CON58 - Connector Kit (100-pin)
CBL58-3M - 3 Meter cable w/mating connector, 100-pin
IO58 - I/O Module - 100-pin without cable
IO58-3M - I/O Module - 100-pin with 3 meter cable
| Model | Computer Interface | Servo Axes | Stepper Axes | User I/O |
| VME58-4 | VME | 0 | 4 Open Loop | 18 |
| VME58-8 | 0 | 8 Open Loop | 22 | |
| VME58-4E | 0 | 4 Closed Loop (Encoder) | 18 | |
| VME58-4S | 4 | 0 | 18 | |
| VME58-8S | 8 | 0 | 22 | |
| VME58-2S2 | 2 | 2 Open Loop | 18 | |
| VME58-2S6 | 2 | 6 Open Loop | 22 | |
| VME58-4S4 | 4 | 4 Open Loop | 22 | |
| VME58-6S6 | 6 | 2 Open Loop | 22 |
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.