 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Multi-Axis Motion Controllers 
VX2/VS4 - VME
The VX2/VS4 are VME bus-based motion controllers, and are one of the newest additions to the OMS family. They are capable of controlling up to 6 axes of stepper motion with encoder feedback available on selected models.
- Output is step & direction
- Each axis has a pair of limit inputs plus a home input as well as an auxiliary output for drive or amplifier current control
- Up to 8 "user definable" TTL I/O lines
- All control signals are on the P2 connector
- Independent and coordinated motion of all axes
- Circular interpolation
- Constant velocity linear interpolation (all axes)
- Electronic gearing
- Parabolic, S-curve & Linear trajectory profiles
Accessories:
CON58 - Connector Kit (100-pin)
CBL58-3M - 3 Meter cable w/mating connector, 100-pin
IO58 - I/O Module - 100-pin without cable
IO58-3M - I/O Module - 100-pin with 3 meter cable
| Model | Computer Interface | Stepper Axes | User I/O | Non-Current Products |
| VX2-002 | VME | 2 Open Loop | 3 | VMEX-2 |
| VX2-004 | 4 Open Loop | 6 | VMEX-4 | |
| VX2-006 | 6 Open Loop | 8 | VMEX-6 | |
| VX2-020 | 2 Closed Loop | 3 | VMEX-2E | |
| VX2-022 | 2 Open Loop and 2 Closed Loop (Encoder) | 6 | VMEX-4E | |
| VS4-020 | 2 Closed Loop (Encoder) | 16 | VME44-2E | |
| VS4-040 | 4 Closed Loop (Encoder) | 18 | VME44-4E |
Copyright © 2009 Micromech Ltd. All rights reserved.
|