Micromech Products - Parker XL Stepper Drive

Micromech Divisions

Systems

Education

Safety Products

Quotation
Request

01376 333333

Need to reduce your paperwork, cut your vendor base, lower costs/simplify production?
What's really required are products delivered from your supplier, ready to install when you need them!

Stepper Drives - PDF Catalogues

XL Stepper Drive / Controller

The XL Series stepper motor drives and power supplies from Parker EME bring new standards of economy for the systems builder and original equipment manufacturer. Derived from the successful L-Series modular drives, the XL range represents exceptional value without compromising on performance.

Protection Motor overcurrent/short circuit , over & under voltage , logic suppy fault , over temperatur
Recommended inductance range 0.8mH - 10mH
Panel mounting
1.8A , 3.5A & 5.6A RMS rating
Up to 80V DC bus
i Versions have Built-in Controller using Parker's EASI code
Powerful front-end software - EASI-Tools
Drive resolution 400, 800, 2000 or 4000 steps/rev
Optional CANopen Interface
Automatic Standby Current Reduction 50% or 70%
Compatible with Parker high performance stepper motors

Technical Data

Device	Continuous Current	Peak Current	Interface	Input Power D.C.
XL25	1.8 A RMS	2.5 A	Step+Direction	24 V & 24 V - 80 V
XL25i	1.8 A RMS	5.0 A	Easi Code	24 V & 24 V - 80 V
XL25CAN	1.8 A RMS	2.5 A	CANopen	24 V & 24 V - 80 V
XL50	3.5 A RMS	5.0 A	Step+Direction	24 V & 48 V - 80 V
XL50i	3.5 A RMS	2.5 A	Easi Code	24 V & 48 V - 80 V
XL50CAN	3.5 A RMS	5.0 A	CANopen	24 V & 48 V - 80 V
XL80	5.6 A RMS	8.0 A	Step+Direction	24 V & 48 V - 80 V
XL80i	5.6 A RMS	8.0 A	Easi Code	24 V & 48 V - 80 V
XL80CAN	5.6 A RMS	8.0 A	CANopen	24 V & 48 V - 80 V

Menu Bar

Micromech Ltd

5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849