Stogra Stepping Motors- PDF Catalogues
All STÖGRA standard motors are 2-phases 1,8° hybrid stepper motors. The customer can select the optimal stepper motor for his application out of a great variety of stepper motor models with different dimensions and operating torque characteristics.
- Standard version
- Gear heads, encoder and brakes for Stögra stepper motors
- Options for Stögra stepper motors
- Hollowshaft motors series SMH88 and SMH107
- 1.8° step angle (at full step operation)
- Cast connection box (IP55) or leads connection (IP41)
- Metric or inch dimensions
- Isolation class F
- High voltage according to DIN VDE 0530
- CE-marked
Series SM56
Motor diameter 56,5mm
holding torque 0,4 Nm bis 1,2 Nm
Series SM87/SM88
motor diameter 86mm
holding toque 1,2 Nm to 4,8 Nm (SM87)
holding torque 4Nm to 16 Nm
Series SM107
motor diameter 108mm
holding torque 4 Nm to 16 Nm
Series SM168
motor diameter 168mm
holding torque 19 Nm to 38 Nm
Gear heads, Encoders and Brakes for Stögra stepper motors
Options for Stögra stepper motors
- rear shaft
- protection class IP68
- vacuum version
- with keyway
- customer specific versions (e.g. modifications on motor shaft)
- planetary gear heads with ratios from 3:1 to 512:1
- encoders with 2 x 50 , 2 x 200 and 2 x 500 pulses per revolution
- permanent magnetical holding brake (e.g. as emergency brake for z-axis)
 |
 |
 |
 |
| stepper motor with gear head |
stepper motor with brake and encoder |
stepper motor |
leaded version |
Hollowshaft motors series SMH88 and SMH107
- with complete hollowshaft
- lead connection or cast connection box
- motor diameter 86mm (SMH88) and 108mm (SMH107)
- holding torque 2,0Nm to 8,0Nm (SMH88) and 4,0Nm to 16Nm (SMH107)
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.