Yaskawa Machine Controllers - PDF Catalogues
MP2300
ALL-IN-ONE CONSTRUCTION TYPE
Up to 48 axis
The new MP2300 Machine Controller with compact cubic body offers best solutions to customers requirements:
- Control to optimize your machine’s performance
- Adaptability to your individual system
- Operability for programming and maintenance
Custom-made Machine Controllers
The MP2300 is an all-in-one machine controller. It has three slots for other modules and a basic module whose standard functions include those of a CPU module, an SVB module, and an I/O module. The CPU can be used to control 48 axes (when two SVB-01 modules are mounted). Most modules used for the MP2200 controller can be mounted in its three slots.
For Global Open Networks
Simply insert the optional modules in the slots to construct a global open network and expand I/O.Access to all controllers in the MP series from the Engineering PC connected to Ethernet and running MPE720.
Synchronous Sequence and Motion Processing
Achieves faster CPU processing and synchronized sequencing of motion control.
The MP2300 Machine Controller controls the machine’s motions in synchronization with high-speed scanning, which helps to reduce tact time. The motion control starts within 1 scan from the start signal. Also, the MP2300 can control different motions at the same time.
Maximizing the speed for arithmetic calculations is essential for high-speed motion control. The high-speed CPU processing of the MP2300 is capable of coping with large-capacity programs.
Command Execution Time is 0.2ms/1,000 steps (1.4 times faster than MP930)
The Program capacity of ladder program has 4k steps when the motion program has 1200k characters. (120k steps max. only with ladder program)
Easy Set-up
No need to input settings because the MP2300 automatically recognizes the connected optional modules and servo drivers.
The MP2300 Machine Controller also automatically recognizes the configurations of the devices connected to the MECHATROLINK network and sets the required definitions to default values. To run a motor effort is reduced to installation and wiring.
Transmission Speed 100 Mbps with Mechatrolink-III
With high-speed network communications to servo drives, changing gains and switching the controls for speed, torque, and position can be accomplished online while the machine is running, so you can flexibly control the machine motions.
With ladder works and application conversion function (Engineering Tool MPE720)
An easy-to-use Windows-based editing technique for programming. Ladder programs of previous models like the MP930 can be easily converted for use with the MP2300. Total support for all stages of programming is also available.
Flexible and Adaptable
Various types of systems, such as analogue or networked systems, can be constructed by combining optional modules. The distributed installation of I/O, the use of a variety of motor drives, and communication to other brands of controllers are possible.
5-8 Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333333 Fax: 01376 551849
Copyright © 2012 Micromech Ltd. All rights reserved.