Micromech
01376 333333

RTA - A-CSD - Open Frame, Stepping Motor Drive

Introduction

  • Series of bipolar microstep stepping motor drives, specifically developed for applications sensitive to acoustic noise and vibration.   
  • Significant evolution of the CSD series, preserving backward mechanical, electrical and applicative compatibility.
  • Target: advanced applications requiring high precision, smoothness of movement and low acoustic noise.

HIGHLIGHTS

  • Full digital microstepping drive.
  • Adaptive microstepping up to 3.200 step/rev.
  • Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.
  • A highly sophisticated control system, preserving anyhow the traditional ease of use of R.T.A. drives.

Technical Specifications

  • Version: open frame drive in 92 x 85 x 22 mm, equipped with AMP connectors.
  • Range of operating voltages: 24-48 VDC.
  • Range of current: 0.7-4.4 Amp. Setting up to eight possible values by means of a dip-switch.
  • Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
  • Automatic current reduction at motor standstill.
  • Management of the current profile setting by means of a dip-switch.
  • Protections: -Protection against under-voltage and over-voltage. -Protection against a short-circuit at motor outputs. -Overtemperature protection with thermal sensor.
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
  • Warranty: 24 months.
Model Name Drive Type Bus Voltage Range (Volt.) Phase Current Range (Amp.)  Dimensions (mm.) Suggested Motors (Flange size) 
A-CSD 02 STEP/DIR ADVANCED 24 - 48 VDC 0.7 - 2.4 Open frame drive 92 x 85 x 22 mm AMP connectors NEMA 11, NEMA 17, NEMA 23, 60 mm.
A-CSD 02.V STEP/DIR ADVANCED 24 - 48 VDC 0.7 - 2.4 Open frame drive 92 x 85 x 22 mm Screw-type connectors NEMA 11, NEMA 17, NEMA 23, 60 mm.
A-CSD 04 STEP/DIR ADVANCED 24 - 48 VDC 2.6 - 4.4 Open frame drive 92 x 85 x 23 mm AMP connectors NEMA 11, NEMA 17, NEMA 23, 60 mm.
A-CSD 04.V STEP/DIR ADVANCED 24 - 48 VDC 2.6 - 4.4 Open frame drive 92 x 85 x 23 mm Screw-type connectors NEMA 11, NEMA 17, NEMA 23, 60 mm.

View PDF Catalogue

For help and advice on choosing the right
product call 01376 333333

Stepper Motor Drives - Open
Call for best price

RTA - A-CSD 02