Trinamic - TMCM-102 - Stepper cDriver™ Module

The TMCM-102 is a single axis 2-phase stepper motor controller and driver module with an aluminium profile for quick and robust mounting. The built in encoder feedback makes it an optimum solution for high-reliability drives. This drive is optimally suited for industrial high-reliability applications. The power stage has very low dissipation when compared to competitors' products. Its interface add-on board concept allows for customer specific interface / connector selection. The TMCM-102 comes with the PC based software development environment TMCL-IDE for the Trinamic Motion Control Language (TMCL™). Using predefined TMCL™ high level commands like "move to position" or "constant rotation" rapid and fast development of motion control applications is guaranteed. Communication traffic is kept very low since all time critical operations, eg. ramp calculation, are performed on board. The TMCL program can be stored in the on-board EEPROM for stand-alone operation. The firmware of the module can be updated via the serial interface. With the stallGuard™ feature it is possible to detect motor overload or motor stall.

 Status  active
 a/b/n incremental  
 Width  70mm
 Height  30mm
 Length  76mm
 Microsteps  1…64
 MotorType  Stepper


 Phase Current, Peak  5A
 Phase Current, RMS  3.5A
 Axes  1
 Motor Supply  18…55V

 Product Guide - Embedded Modules


 TMCM-102 Datasheet

For help and advice on choosing the right
product call 01376 333333

Call for best price