Trinamic - TMC5062 - Integrated Motor Driver and Motion Controller

The TMC5062 cDriver™ is an integrated motor driver and motion controller solution for CCTV cameras, pumps and other automated equipment applications. The device has two integrated sixPoint™ ramp controllers, microstepping indexers, the sensorless stall detection technology stallGuard2™ and the load dependent speed control dcStep™ and is intended to drive two bipolar stepper motor. The output driver blocks consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC5062 is capable of driving up to 1.5A of current from each output (with proper heatsinking). TMC5062 is designed for a supply voltage of 5...20V. For high reliability requirements an Encoder interface provides feedback over the system status. The device provides a SPI interface for configuration and diagnostics and a step and direction interface.

 Status  preview
 Interfaces  a/b/n incremental
 Velocity Ramps  trapezoidal
 Microsteps  1…256
 Features  programmable microstep table
 MotorType  Stepper
 Features  chopSync™
 Phase Current, Peak  1.5A
 Phase Current, RMS  1.1A
 Rds(On), N Channel, min  0.4A
 Rds(On), N Channel, min  0.5A
 Axes  2
 Motor Supply  5…20V
 Logic Supply  3.3…5V
 Package  QFN48 (7x7)


 Product Guide - Integrated Circuits



 TMC5062 Datasheet

For help and advice on choosing the right
product call 01376 333333

Integrated Circuits
Call for best price

Trinamic - TMC5062-LA