Meeting the application requirements of both high loads and compact space, Thomson H-Track actuators feature self-contained hydraulic actuation in the space-conscious form factor of an electric actuator. The H-Track is completely sealed, contaminant-free and maintenance-free for the life of the actuator. A marine-grade option uses 316 stainless steel components to improve corrosion resistance, while its sealed motor housing enables underwater operation. The H-Track resists drifting and holds a load stationary without power during load reversals, allowing it to hold position in high-wind environments, and withstand high shock-load applications and bouncing loads.

H-Track Actuator Feature Highlights:

• Hydraulic drive delivers up to 4,800 pounds (21,350 N) of force and travel speeds near 4 in. (100 mm) per second.
• The anodized aluminium alloy housing resists corrosion and provides protection from dirt, dust, humidity and many corrosives.
• Temperature operating range of -26ºC to 65ºC (-20ºF to 150ºF) standard / -40ºC to 54ºC (-40ºF to 130ºF) and -18ºC to 80ºC (0ºF to 180ºF) available.
• Standard stroke lengths of 2, 4, 6, 8, 10, 12, 14 and 16 in. (51, 102, 152, 203, 254, 305mm).
• IP65 (without marine option) and IP68 dynamic (with marine option), IP65/IP67/IP69K static
• Rod does not require torsional restraint.

LC3000 Features and Benefits:

• For medical and ergonomic automation applications
• Self supporting column in extruded anodized aluminium
• Low weight and quiet operation
• Smooth operating ballscrew drive
• High load torque capability
• Short retracted length
• Maintenance free
• Load holding brake
• Integrated end of stroke limit switches

LC2000 Features and Benefits:

• For medical and ergonomic automation applications
• Self supporting column in extruded anodized aluminium
• Low weight and quiet operation
• Smooth operating telescopic lead screw drive
• High load torque capability
• High extension to retraction ratio
• Maintenance free
• Load holding brake
• Integrated end of stroke limit switches
• EMC recognized for medical applications
• Very short retracted length

DMD/DDA Features and Options:

• Extruded anodized aluminium column
• Internally restrained
• Holding brake on ball screw units
• Self-locking on acme units
• Overload clutch for mid/end-stroke protection
• Auto reset thermal switch motor protection
• Safety nut on all ball screw models
• T-slot grooves on entire profile
• CE Certification
• Optional linear potentiometer

Features and Benefits

• Designed for industrial applications
• E-coated housing for corrosion resistance
• Maintenance free
• Flying leads or connector
• High end features at a low cost
• Analog position feedback sensor, electronic limit switch or CANBUS (J1939) options
• Integrated electronic options
• Integrated mounting holes
• Self-locking lead screw
• Space saving design
• Built in end of stroke and mid stroke protection
• Rugged aluminium housing with IP69K/IP67 sealing

Applications

• Agricultural vehicles
• Marine applications
• Street sweepers
• Auxiliary engines
• Mobile generators
• Construction equipment
• Military and rescue vehicles
• Trucks
• Fork lifts
• Pump trucks
• Garden and forestry equipment
• Mass transport vehicles
• Mining equipment
• Industrial automation

LM80 Rodless Features:

• Horizontal or vertical versions
• Self-supporting extruded aluminum profile
• T-slot mounting
• Safety nut on ball screw models
• Internally restrained
• Spring-loaded soft stop protection
• Auto reset thermal switch motor protection
• Motor cable and connector
• Maintenance free

LM80 Rodless Options:

• No motor enclosure
• Manual override
• Alternative motor positions
• Stroke lengths over 1500 mm
• Encoder feedback

Electrak PPA-DC Features

• Trunnion to clevis mounting
• Holding brake
• Overload clutch for mid/end of stroke protection
• Auto reset thermal switch for motor protection
• Flying leads
• CE compliance

Electrak PPA-DC Options

• Hall effect positioning sensors
• End of stroke limit switches
• Encoder feedback
• Protective bellows
• Manual override

Electrak PPA-AC Features

• Integrated motor capacitor
• Trunnion to clevis mounting
• Overload clutch for mid/end of stroke protection
• Auto reset thermal switch for motor protection
• Holding brake
• Flying leads
• CE compliance

Electrak PPA-AC Options

• Hall effect positioning sensors
• End of stroke limit switches
• Encoder feedback
• Potentiometer feedback
• Protective bellows
• Manual override
• Anti-coast brake
• Electrical brake

Electrak PPA-M Features

• Double input shaft for motor and/or intermediate shaft mount
• Synchronous operation
• Manual operation possible
• Withstands very harsh environments
• Holding brake
• Trunnion to clevis mounting
• Maintenance free

Electrak PPA-M Options

• Protective bellows

Electrak LL Features

• Long-life ball screw and nut assembly
• Long-life ball screw and nut assembly
• Long-life load-bearing design
• Long-life manual override design
• Efficient long-life brushless motor
• Brushless motor drive system
• Specially designed onboard control, meeting railway safety standards (EN 50155, EN 60077, EN 4554)
• CE, RoHS, REACH compliant
• UV-resistant surface treatment
• Thomson Electronic Monitoring Package safety functionalities
• High corrosion protection

Electrak LL Option Highlights:

• LEX = Electronic Monitoring Package + low-level signal motor switching + external end-of-stroke limit switch inputs
• All stainless steel external hardware
• 4 kN at 30 mm/s or 6 kN at 15 mm/s
• Up to 500 mm stroke length

Electrak LL Applications:

• Pantograph control
• Lifting and positioning in mobile equipment
• Door, hatch and valve control
• Picking, placing and sorting
• Material handling
• Conveyor control